Creative Gas Detection Solutions
800-521-2978 | info@enmet.com

ISA-60M with MRI-5175 O2 Sensor/Transmitter

ISA-60M fixed gas detection systems

ISA-60M with MRI-5175 O2 Sensor/Transmitter

1-3 Channel Oxygen Monitor for MRI Installations

The ISA-60M controller with remote MRI-5175 oxygen sensor/transmitter is specifically designed to continuously monitor for oxygen deficiency in a Magnetic Resonance Imaging (MRI) facility. Maintaining the quality of breathing air in an MRI room is an important safety consideration. Cryogenic gas used to maintain the magnetic field is highly dangerous if released into an enclosed space. Inert gas can create a hazardous situation by reducing the concentration of oxygen in the breathing air to unsafe levels. The ISA-60M system ensures the safety of the technicians and patients by continuously monitoring and displaying the levels of oxygen in the room and providing audio and visual alarms when there is an unsafe, low level oxygen condition in the area being monitored. The ISA-60M controller can be mounted in the MRI control room and the MRI-5175 sensor/transmitter can be mounted remotely in the area where the MRI unit is actively operating. The ISA-60M is available with up to three channels, allowing for up to three MRI-5175 O2 sensors to be located in separate locations.

Part No: N/A
   

-
Choose Multiple Part NumbersClear

Choose Calibration Equipment

Choose Accessories/Replacement Parts

  • Continuous monitoring of area with Long-life oxygen sensor
  • Oxygen sensor/transmitter is designed for EMC compatibility
  • User-programmable alarms and high capacity relays
  • 4-20 mA inputs and outputs
  • 100-240 VAC, 12 VDC power options
  • Fault relay and visual fault alarm
  • RS-232/485 with Modbus protocol
  • Safety Approvals: CE
  • Conforms to STD 61010-1
  • Certified to C22.2 #61010-1

Temperature: 32° to 104°F (0° to 40°C)

Relative Humidity: 10-99% RH, non-condensing

Pressure, Atmospheric: 20 to 36 inHg (68 to 122 kPa)

Approval: Safety Approvals: CE, Conforms to STD 61010-1, Certified to C22.2 #61010-1

 

ISA-60M MONITOR SPECIFICATIONS:

Standard Alarm Points: 19.5% & 17% decreasing oxygen

Display: High-contrast, backlit

Alarms:  Visual: LEDs; Audible: Piezoelectric horn, 95 dB at 2 feet

Alarm Relays: 5 programmable gas relays plus fault. All relays are programmable latching or nonlatching,
dry SPDT, 10 amps (resistive load only) at 110 VAC.

Operating Power: 100 to 240 VAC and/or 12 VDC, 15 Watts

Connections: Strain relief (2 supplied) for 0.20” to 0.35” OD Cable

Operating Power: 100 to 240 VAC and/or 12 VDC, 15 Watts

Enclosure: Thermoplastic box with clear, hinged front cover, designed for NEMA 12 and 4X

Size: 10.5 H x 8.5 W x 5.8 D inches (27 x 22 x 15 cm)

Weight: 8 lbs. (3.6 kg)

 

MRI-5175 TRANSMITTER

Alarms: Visual:  3 Red LEDs; Visual Power/FaultGreen/Red LED; Optional Audible Alarm:  105 dB at 12 inches (30 cm)

Outputs: 4-20 mA, RS-485 Modbus

Power: 24 VDC from ISA-60M

Connection to ISA-60M: Strain relief (1 supplied) for 24 VDC, 4-20 mA, 0.20” to 0.35” OD Cable

Enclosure: Fiberglass-reinforced polyester with non-magnetic coating and hardware

Dimensions: 5 x 5 x 4 inches (2 x 2 x 1.6 cm)

Weight: 2 lbs. (0.9 kg)

Oxygen Sensor supplied with MRI-5175:  Type: Electrochemical; Range: 0 to 30.0% by Vol. O2Resolution: 0.1% by Volume Oxygen; Typical Life: 4 to 5 years

Sensor Cable from MRI-5175 to ISA-60M: 3-wire, shielded cable, typically 18 to 20 AWG, user supplied, UL Listed type CM, PLTC or TC

  • Oxygen (O2)

Calibration Equipment for ISA-60M:

Part No.                 Description

03100-185            Alarm Point Test Gas,11 liter aluminum cylinder, 18.5% Oxygen with bellows assembly (order #03620-021 separately)

03100-209            Calibration Gas, 11 liter aluminum cylinder, 20.9% Oxygen with bellows assembly (order #03620-021 separately)

03620-021            Calibration Cover (use with 03100-185 or 03100-209)

 

Accessories/Replacement Parts:

04566-004 Battery Backup and Charging System, 12 VDC, 24 amp/hour

66017-006 Sensor/Transmitter Cable, 3-conductor, 18 AWG, shielded (MRI-5175 to ISA-60M)

67016-1152 Replacement Oxygen Sensor, Long-life type

To place an order, please contact our experienced and professional customer service team:
Click to Submit an Itemized RFQ
Click for a Quick Quote

If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable gas monitoring experts. They will be able to walk you through the ordering process quickly and professionally.

Instrument                                                                                                                 Part No.

ISA-60M, Single-Channel, with one MRI-5175 O2 Sensor/transmitter             04650-001

ISA-60M-2, Dual-Channel, with two MRI-5175 O2 Sensor/transmitters           04650-002

ISA-60M-3, Three-Channel, with three MRI-5175 O2 Sensor/transmitters      04650-003

Literature

copy-of-isa-60m-thumb

      Calibration

isa-60m-calibration-procedure-thumb

Manual