Creative Gas Detection Solutions
800-521-2978 | info@enmet.com

CD-1300-ST Carbon Dioxide Sensor

CD-1300-ST Remote Gas Monitoring - Sensor Transmitter

CD-1300-ST Carbon Dioxide Sensor

Carbon Dioxide Sensor/Transmitter

The CD-1300-ST Sensor/Transmitter is easy to install and maintain. The output signal is 4-20 mA or an optional 0 to 10 volt interface. The isolated power supply eliminates any ground loop or electrical interface problems when multiple units are connected to the same controller. Low power consumption makes the CD-1300-ST suitable for battery-powered applications. Features include a bright 0.4” high LCD display for easy wide-angle readability. For direct control applications the relay can be configured to open or close above the setpoint and is easily adjusted in the field. For ventilation control applications, the ductwork monitoring option is recommended.

Part No: N/A
   

-
Choose Multiple Part NumbersClear
Click to View Quote
  • Provides continuous, accurate reading of indoor CO2 levels
  • Easy to install, maintain and calibrate
  • 4-20 mA output

Parameter                                              Value

Operating principle                               Non-dispersive infrared (NDIR)

Gas sampling method                           Diffusion or available duct kit

Measurement range                              0-2000 or 0-5000 ppm

Repeatability                                          ± 20 ppm

Measurement accuracy                        ± 5% of reading or 75 ppm, whichever is greater

Warm up                                                 Less than 1 minute

Power requirements                             18-30 VDC or 18-28 VAC

Power consumption                              Less than 1 watt

Operating temperature range             0-50º Celsius

Operating humidity range                   5-95% RH, non-condensing

Voltage output (linear)                         0-10 VDC full scale standard.  Range field adjustable from 1-10 VDC

Current output (linear)                        4-20 mA (Maximum loop resistance:400 ohms)

LCD display                                            4 digit, 0.4” high

Alarm relay contact rating                   3 amps @ 24 VAC

Case dimensions                                    5.25 x 3.25 x 1.4 inches (133 x 82 x 35 mm)

Enclosure material                                Satin finish, high impact plastic

  • Carbon Dioxide (CO2)

Calibration Equipment for CD-1300-ST:

Part No.                 Description

02506-005            Gas Regulator Assembly 0.2 Lpm, for 103 liter as cylinders

03223-1000          Calibration Gas, 103 liter steel cylinder, 1000 ppm Carbon dioxide, CO2

03223-2000          Calibration Gas, 103 liter steel cylinder, 2000 ppm Carbon dioxide, CO2

To place an order, please contact our experienced and professional customer service team:
Click to Submit an Itemized RFQ
Click for a Quick Quote

If you cannot find what you need or require a custom part, simply call and speak to one of our knowledgeable gas monitoring experts. They will be able to walk you through the ordering process quickly and professionally.

Description                                                                                                            Part No.

CD-1300-ST Sensor/Transmitter for Carbon dioxide, CO2                            10050-1331

Literature
copy-of-cd-1300-st-thumb

Manual