You are Here: Home » Stationary/Fixed/Continuous Monitors » MX Controllers

Navigate this page: Specifications Models Available Contact ENMET Download Printable Version for these Instruments MX-42/48 MX-52 Go To Product Literature   Gas Types ------------------------------------- Acetone Acetylene Ammonia Arsine ------------------------------------- Benzene Boron trichloride Butane 2-Butanone ( MEK ) 2-Butanone ( MEK ) Bromine ------------------------------------- Carbon dioxide Carbon monoxide Chlorine dioxide Combustible Gas ------------------------------------- Diborane Dichlorosilane Disilane ------------------------------------- Ethyl alcohol Ethylene Ethylene oxide ------------------------------------- Fluorine Formaldehyde ------------------------------------- Gasoline Germane ------------------------------------- Heptane Hexane Humidity/Dew Point Hydrocarbons Hydrogen Hydrogen bromide Hydrogen chloride Hydrogen cyanide Hydrogen fluoride Hydrogen selenide Hydrogen sulfide ------------------------------------- Isobutane Isopropyl alcohol ------------------------------------- Kerosene ------------------------------------- Methane Methyl ethyl ketone ------------------------------------- Natural gas Nitric oxide Nitrogen dioxide ------------------------------------- Octane Organic solvents Oxygen Ozone ------------------------------------- Propane Propylene Propylene oxide Phosgene Phosphine ------------------------------------- Silane Solvents Sulfur dioxide ------------------------------------- Toluene ------------------------------------- Water/Dew Point ------------------------------------- Xylene   Calibration Equipment, Replacement Parts and Accessories are available. Call us for More Information.

Enguard MX-Series Controllers
Toxic and Combustible Gas Detection System

Enguard MX-Series Controllers can be connected to any of the variety of toxic and combustible gas sensor/transmitters offered by ENMET. These controllers provide the 24 Vdc loop power for the sensor/transmitters and receive the 4-20 mA signal which is displayed as gas concentration. An essential function of the controller is to provide alarm relay contacts.

• Independent Channel Operation

• Audio and Visual Alarms

• Microprocessor Based Electronics

• Utilizes SMC Technology

• Programmable Alarms & Relays

• 3 Alarms per Channel

• Digital System Display

• 4-20 mA Output per Channel

• Fault Alarm & Relay

• Alarm Status LEDs

• Provides 24 Vdc Loop Power

• Simple Wall-Mount Installation

• RFI and EMI Suppression

• CE Mark