You are Here: Home » Stationary/Fixed/Continuous Monitors » ENGUARD 97D

Navigate this page: Specifications Gases Detected Enguard 97 Stand Alone Unit Wiring Table Contact ENMET Download Printable Version for this Instrument Go To Product Literature   Gas Types ------------------------------------- Acetone Acetylene Ammonia Arsine ------------------------------------- Benzene Boron trichloride Butane 2-Butanone ( MEK ) 2-Butanone ( MEK ) Bromine ------------------------------------- Carbon dioxide Carbon monoxide Chlorine dioxide Combustible Gas ------------------------------------- Diborane Dichlorosilane Disilane ------------------------------------- Ethyl alcohol Ethylene Ethylene oxide ------------------------------------- Fluorine Formaldehyde ------------------------------------- Gasoline Germane ------------------------------------- Heptane Hexane Humidity/Dew Point Hydrocarbons Hydrogen Hydrogen bromide Hydrogen chloride Hydrogen cyanide Hydrogen fluoride Hydrogen selenide Hydrogen sulfide ------------------------------------- Isobutane Isopropyl alcohol ------------------------------------- Kerosene ------------------------------------- Methane Methyl ethyl ketone ------------------------------------- Natural gas Nitric oxide Nitrogen dioxide ------------------------------------- Octane Organic solvents Oxygen Ozone ------------------------------------- Propane Propylene Propylene oxide Phosgene Phosphine ------------------------------------- Silane Solvents Sulfur dioxide ------------------------------------- Toluene ------------------------------------- Water/Dew Point ------------------------------------- Xylene   Calibration Equipment, Replacement Parts and Accessories are available. Call us for More Information.

ENGUARD 97D
Stand-Alone Controller
With Integral Toxic Gas Sensor or
Optional Remote Sensor with Cable

1. Electrochemical Sensors available for Oxygen, Hydrogen and Many Toxic Gases

2. Audio and Visual Alarms

3. Standard with AC Line Cord

4. Power: 85-265 Vac, 24 Vdc

5. 4-20 mA Output Signal

6. LCD Display of Gas Concentration in ppm, or % by Volume for Oxygen

7. Three Factory Programmable Alarm Points

8. 5 Vdc TTL outputs available for Auxiliary Alarm Activation from Three Factory Set Points

9. Pushbutton Calibration

10. IP 65, Polycarbonate Enclosure

11. One Alarm Relay, user selectable (alarm 1, 2 or 3)

12. Integral or Optional Remote Sensor

The ENGUARD 97D system is a self-contained single point gas monitor with an integral sensor. As an option, the instrument can be supplied with a remote sensor on a six foot cable. This unique system includes a digital display, LED visual alarms, an audio alarm, and comes standard with an AC line cord. The unit is provided with three factory programmed alarm points.