Enmet Home Enmet Products Enmet Support and Documentation Enmet Corporate Info
Enmet
ProAir 2200 Gas Monitor

You are Here: Home » Respiratory Compressed Air Products » ProAir 2200

Navigate this page:

carrot

Specifications

carrot

Contact ENMET

carrot

Download Printable Version
for this Instrument

carrot

Go To Product Literature
Enmet spacer
 
gas selector
 
Enmet spacer

Calibration Equipment, Replacement Parts and Accessories are available. Call us for More Information.
Enmet spacer

ProAir 2200
Gas Monitor for Compressed Air Lines


Available With Up to Four Sensors for Monitoring VOCs,
Dew Point, Oxygen, H2, CO2, CO and Other Toxic Gases

 

  • Many Instrument Configuration Options Available for VOCs, Dew Point, Oxygen, H2, CO2, CO and many Other Toxic Gases

  • Designed for Monitoring Compressed Air Lines

  • Monitors Up to 4 Gases with a Combination of Internal Sensors

  • Designed for use in Industrial, Aerospace, Medical and
    Pharmaceutical Applications

  • Programmable Relay Contacts

  • Adjustable Alarm Points

  • Large Easy-to-Read Display

  • RS-232/RS-485 Modbus Communication

  • 4-20 mA Outputs

  • VOCs and Dew Point Monitoring in One Package

  • Classified to UL 60601-1
    IEC 60601-1 & CSA 22.2, No. 601.1

 

ProAir 2200 is a microprocessor-based monitor especially designed for use in industrial, aerospace, medical and pharmaceutical applications. It can continuously and simultaneously monitor up to 4 gas conditions. The system can be custom configured to monitor a variety of conditions, including VOCs, dew point, oxygen and a number of other gases. The instrument has a user-friendly interface for all maintenance and operation functions, and it is protected by a compact and durable enclosure for process environments.


Enmet spacer

General Specifications

Display:

2 line, 16 character, dot matrix LCD


Alarms:

Visual: LEDs, Audible: piezo electric


Horn:

95 dB at 2 feet


Alarm Relays:

5 programmable gas relays plus fault. All relays are programmable latching or non-latching, dry SPDT, 10 amps, (resistive load only) at 110 VAC.


Operating Power :

100 to 240 VAC and/or 12 VDC, 15 Watts


Inlet Pressure, for internal sensors:

Must be regulated to 55 psi (user provided)



Flow Rate, for internal sensors:

1 liter per minute (2 SCFH)


Enclosure:

Thermoplastic box with clear, hinged from cover, designed for NEMA 12 and 4X

Size:
10.5 x 8.5 x 7.8 inches

Weight:
8 lbs.


For more detailed information including instrument drawing with interior features see product literature:
ProAir 2200 Literature
Enmet spacer

Sensor Specifications

Gas Typical Range (1) Display Resolution Example (2)
Low, High (3)
Alarm Point LEDs
VOCs 0-100 ppm 0.1 ppm 10, 20 ppm
Dew Point -112° to 68°F 1°F -40°, +39°F
N2O 0-2000 ppm 20 ppm 100, 500 ppm
HC 0-100% LEL 1% LEL 10, 20% LEL
HC/VOCs 0-500 ppm 1 ppm 100, 200 ppm
CO2 0-5000 ppm 20 ppm 1000, 2000 ppm
O2 0-30% by Vol 0.1% by Vol 19.5%, 23.5% by Vol
CO 0-500 1 ppm 50, 200 ppm
NH3 0-100 1 ppm 25, 75 ppm
SO2 0-30 ppm 0.1 ppm 2, 10 ppm
H2 0-2000 ppm 1 ppm 200, 1000 ppm
H2S 0-100 ppm 1 ppm 10, 50 ppm
NO 0-100 ppm 1 ppm 25, 75 ppm
NO2 0-30 ppm 0.1 ppm 3, 10 ppm
ETO 0-10 ppm 0.1 ppm 3, 9 ppm

 


NOTES:
(1) Examples of typical ranges. Other ranges may be available on request.
(2) Examples of typical alarm points. Other alarm points available on request.
(3) High and Low alarm points are user programmable.

For more detailed information including instrument drawing with interior features see product literature:
ProAir 2200 Literature

back to top